div.diContent{ display:block; font-size:11pt; margin:2px 20px 10px 34px; text-align:justify; }

PRODUCTS: HPLC Column Heaters/Cooler

Cera Column Heaters/Cooler

Easy Installation - attaches directly on the column in place
Efficient - no additional tubing required
Accurate - microprocessor-based temperature control
Space Saving - minimal bench-top requirements
Low Power - efficient oven design provides effective heat transfer
Dual Display - view set point and actual temperature simultaneously
Safe - low voltage power system
Stable - completely enclosed compact chamber

Heater Operating Range:	5°C above ambient to 85°C
Cooler Operating Range:	5°/55°C with ambient between 20/24°C
Display:	Dual LED displays of actual and set point temperature in °C
Temperature Accuracy:	±2°C over entire range
Temperature Repeatability:	±1°C
Temperature Stability:	±0.1°C
Time To Stabilization:	85°C in less than 30 minutes
Average Cooling Time:	15 minutes
Column Capacity:	¼” OD, up to 2.5 cm in length (with Mobile Phase Pre-Heater option)
Controller Dimensions:	2.8 x 4.0 x 6.5 inches
Heater Dimensions:	1.5 x 1.5 x 17 inches with 3 foot retractable coil
Weight:	3.6 lbs
Power:	External 24VAC, 1.2A power supply
More Info:	View Operating Instructions in PDF format (4 MB).

Part Number	Description	List Price

Derivatizing Agents for GC/MS confirmation

282-0240

Column Heater 150 - Includes column mantle, controller and cylinder inserts for 5/16" OD columns, up to 15cm in length. External UL/CSA approved power supply requires 117VAC±10%, 60 Hz input

$1045.00

282-0252

Column Heater 250, Same as column heater 150 for columns up to 30cm in length

$1045.00

282-0253

Column Heater 250, VDE Version. Same as column heater 250 but requires 220VAC ±10%, 50 Hz input.

$1045.00

282-0300

Column Cooler 250. Thermoelectric cooling unit includes column mantle, controller and cylinder inserts for 5/16" OD columns. External switching 12VDC output power supply. UL/CSA/TUV approved, requires 100-250 VAC, 50/60 Hz input.

$2305.00

282-3010

Mobile Phase Pre-Heater/Cooler. Accessory for Column Temperature Controllers listed above. Consists of 0.005" ID x 1/16" OD x 0.5m stainless capillary tubing coiled on aluminum mandrel, HPLC fittings not included.

$91.00

282-3011

Mobile Phase Pre-Heater/Cooler. Same as above but with 0.010"ID x 1/16" x 0.5m tubing.

$91.00

282-0905

Column Heater/Cooler Inserts. Clear anodized for 5/16" (0.320") columns. Each set contains 7 inserts, 3- 2.00" in length, 1- 1.33", 2- 1.00", and 1- 0.66"

$39.00

282-0910

Column Heater/Cooler Inserts. Gold anodized for 3/8" (0.400") columns

$39.00

yesproduct-data.js